Spanish
English
French
Portuguese
German
Arabic
Hindi
Categories
High Speed 8GHz Real-time EMC and EMI Diagnostic Tool
Product Description
EMC and signal integrity are major concerns in the design of ultra-high speed (>2 GHz) PCBs. EMScanner enables the design engineers to diagnose EMC/EMI problems between 150 kHz and 8 GHz.
The EMScanner provides unique pre- and post- EMC compliance testing that images real-time emissions. EMScanner allows engineers to visualize the root causes of potential EMC and EMI problems.
During any new PCB development process, design engineers must find, characterize, and address unintended radiators or RF leakage to pass compliance testing. EMScanner allows board designers to pre-test and resolve EMC and EMI problems early on, thus avoiding unexpected EMC compliance test results.
EMScanner delivers repeatable and reliable results that pinpoint in less than a second the cause of a design failure. As a result, the user can personally test the design without having to rely on another department, test engineer, or time-consuming off-site testing. After diagnosing even an intermittent problem, the engineer can implement a design change and retest. The results provide concrete verification of the effectiveness (or not) of the design change.
EMScanner consists of a patented scanner and compact adaptor, and of a customersupplied spectrum analyser and PC running EMScanner software. EMScanner diagnostic capabilities allow design teams to reduce testing time by more than two orders of magnitude. Users have also documented fifty percent reductions in design cycle times. This
allows the design team to immediately analyse and compare design iterations.
Ideal PCB projects for EMScanner are boards designed for high speed, high power, and/or high density/complexity. Any PCB that places a premium on board real-estate also qualifies as an excellent candidate.
The compact, flat scanner provides PCB design teams with an easy-to-use, cost-effective, and proven tabletop solution. Emission, immunity, filtering, EMI shielding, broadband noise and Common Mode testing are some of the applications that the EMScanner system addresses in mere seconds.
Product Features
Capability : Spectral scan, spatial scan, peak-hold, continuous scanning, spectral and spatial comparison, scripting, limit lines and report generation.
Spatial scan time : Continuous real-time or sub-second single scan for entire scan area Dependent on spectrum analyser performance.
Spectral scan time : 45 seconds for L 10 cm x W 10 cm (L 4” x W 4”) PCB with a 100 MHz span and 100 kHz RBW. Scanning area, span and RBW are user selectable within spectrum analyser specifications
Supported spectrum analysers : If your analyser is not listed, please contact YIC for custom driver development.
Supported operating systems : Windows 10®
Supported CAD overlays : Standard Gerber© RS274x format and HPGL format
More Products in EMI/EMC Solutions
Newsletter
Stay in touch with us
Get in Touch
© 2021 Scientech Technologies Pvt. Ltd. All Rights Reserved.
Success! Request Sent!
Thank you for your query, we will get back to you as soon as possible.
Please check your mails regularly.
Failed! Request cannot be sent!
Sorry, there is problem with query, please try again later