Spectrum Analyzer

Spectrum Analyzer
Rigol - DSA700 Series

Product Description

The ability to measure smaller signals: on the basis of this technology, the IF filter enables smaller bandwidth settings, which greatly reduce the displayed average noise level.

The ability to distinguish between small signals by frequency: using the IF filter with the smallest bandwidth setting, it is possible to make out signals with a frequency difference of only 100 Hz.

High precision amplitude readings: this technology almost eliminates the errors generated by filter switching, reference level uncertainty, scale distortion, as well as errors produced in the process of switching between logarithmic and linear display of amplitude when using a traditional analog IF design.

Higher reliability: compared with traditional analog designs, the digital IF greatly reduces the complexity of the hardware, the system instability caused by channel aging, and the temperature sensitivity that can contribute to parts failure.

High measurement speed: the use of digital IF technology improves the bandwidth precision and selectivity of the filter, minimizing the scanning time and improving the speed of the measurement.

Product Features

  • All-Digital IF Technology
  • Frequency Range from 100 kHz up to 1 GHz
  • Min. -130 dBm Displayed Average Noise Level (Typ.)
  • Min. <-80 dBc/Hz @ 10 kHz Offset Phase Noise
  • Level Measurement Uncertainty <1.5 dB
  • 100 Hz Minimum Resolution Bandwidth
  • Advanced Measurement Functions (Opt.)
  • EMI Filter & Quasi-Peak Detector Kit (Opt.)
  • PC Software (Opt.)
  • Optional RF TX/RX Training Kit
  • Optional RF Accessories (Cable, Adaptor, Attenuator ...)
  • Complete Connectivity: LAN (LXI), USB Host & Device, GPIB (Opt.)
  • 8 Inch WVGA (800×480) Display
  • Compact Size, Light Weight Design

More Products of Spectrum Analyzers