Overview

In the present scenario, the concept of circuit design has been switched from discrete design to system on chip i.e. SOC type design. Firstly today’s IC is software configurable and for that user has to use software interface using PC/laptop. So the computer is the necessity for engineers in all domain (basic electronics, VLSI, Embedded, DSP, Communication, Instrumentation, etc.). Secondly traditional TMI is the basic need for the design engineers.

In the modern world, Scientech DesignLab2 is an ultimate solution for engineers in design, application, and in field services. It is space saving, allows faster testing time, and faster troubleshooting.

DesignLab2 has different TMI capabilities like Digital Storage Oscilloscope, Mixed Signal Oscilloscope, Logic Analyzer, Synthesized Function Generator, Pattern / Word Generator, Programmable Clock, Programmable Power Supply, Data acquisition, Volt meter, Current meter etc. It has features of analysis on multiple large and simultaneous windows, storage of waveforms on PC, sharing waveform data, virtual component library for real-world hardware interface and event scheduler to automate testing. Now Institutes can simply have one DesignLab2 and one laptop/tablet on each table, replacing multiple boxes.

Capabilities

Function Generator

Generate standard Synthesized Signal waveforms like Sine, Square, Triangular, Ramp, and Pulse. Set and change its parameters using user friendly Graphical User Interface (GUI).

Pattern Generator And Clock Generator

Pattern Generator generate 8 different repetitive pattern of 8 bit length. Clock frequency of generated pattern can be changed using its software screen.

Clock Generator separate output for clock signal can be generated to use or to trigger any external design under test.

Fixed And Variable Power Supply

Fixed Power Supply that can be used to power high current digital electronic circuits.

Variable Power Supply can be used to power analog or digital circuit where positive and negative supply is to be used; Output required can be set by interactive GUI provided for Power Supply.

Logic Analyzer

Capture and display multiple signals from a digital system or digital circuit. Cursors are provided to analyze signal and result can be stored in Image format.

Digital Oscilloscope

Analyze Analog or Digital outputs of your design under test on two channel Digital Oscilloscope. Volt per division, Time per division can be changed by a single click. User can measure frequency & amplitude and store results in image or CSV format.

Mixed Signal Oscilloscope

Analyze one Analog and eight Digital outputs of your design under test simultaneously on software screen. Use CH1 for Analog and D0 to D7 of Logic Analyzer. Connector for Digital Signals, Volt per division, and time per division can be changed by user friendly GUI screen.

Frequency Counter

Measure Frequency or measure the number of oscillations or pulses per second in a repetitive electronic signal.

Voltmeter and Current Meter

Measure the potential difference, or voltage, between two points in an electrical or electronic circuit and to measure the current in a circuit.

Data Acquisition

Acquire & Measure an electrical or physical phenomenon such as temperature, humidity, pressure, sound etc. with software provided. Can also be used as Analog and Digital Input output device and data logger.

Event Scheduler

For multiple or repetitive testing / calibration. It can also be used to schedule the event for all the built in instruments and can be use all instrument parallely.

Activity Tool: It is a special tool to use virtual component in real time, components like switches, LED, displays, combinational, operational amplifier, motor interface, relay interface and many more components are available.

Features

  • Sleek design
  • Use all instruments parallely
  • Interactive Virtual Graphical User Interface Software
  • Separate window for every Instrument
  • User friendly and easy navigation
  • 12 in 1 Multi Instrument
  • Multi utility board to explore Design Lab2 (Optional)
  • Event scheduler for design & testing of circuits
  • USB 2.0 Interface
  • Separate USB Powered Data Acquisition Solution
  • Virtual Analog-Digital Component & Circuit Libraries for real world

Technical Specifications

Synthesized Function Generator

Frequency Range
1 mHz to 5MHz (Sine), 1mHz to 3MHz (others)
Amplitude Range
20mV to 20Vpp (O.C.)
DC Offset (O.C.)
± 5Vpp
Built-in Signals
Sine, Square, Triangle, Ramp, Pulse, TTL
Sampling Rate
100MSPS

Digital Storage Oscilloscope

No. of Channels
2 Analog (CH1 & CH2)
100MSPS per channel
8-bit per channel
Memory
2K
3-dB Band-width
10MHz
Vertical range
5mV/div to 10V/div
Triggering Source
CH1, CH2
Measurements (Manual)
Voltage & Frequency

Mixed Signal Oscilloscope

No. of Channels
1 Analog (CH1) + 8 Digital
100MSPS per channel
8-bit per channel
Memory
2K
3-dB Band-width
10MHz
Vertical range
5mV/div to 10V/div
Triggering Source
CH1, CH2
Measurements (Manual)
Voltage & Frequency
Trigger
Level

Spectrum (FFT Analysis)

Logic Analyzer

No. of Channels
16
Maximum Sampling Rate
100MSPS
Memory
2K per channel
Input Voltage Tolerance
7V (max.)

Digital Pattern Generator

No. of Channels
8
Maximum Sampling Rate
100MSPS
Pattern Length
8-bit
Memory
2K
Frequency Range
1KHz to 5MHz

Variable Power Supply

No. of Channels
2
Output Voltage
±12V
Max. Output Current
250 mA (with load)

Data Acquisition

Type
Analog and Digital
Analog Input
8
Analog Output
2
Digital Input
8
Digital Output
8
ADC Resolution (In Bit)
24
Unity Gain Amplifier (Buffer)
2(0 – 5V)
Connectivity
USB
Data Logging
PC Based
Power Supply
USB Powered
Software
Yes
Interface
USB2.0

Fixed Power Supply

Output Voltage
+5V
Max. Output Current
2A (with load)

Frequency Counter

Frequency Range
DC to 50 MHz
Sensitivity
0.5Vrms
Input Impedance
1MW
Max. Input Voltage
200 V (DC + AC Peak)

Voltmeter (DC)

Maximum Voltage
±15V
Resolution
100mV

Current meter (DC)

Maximum current
±500mA
Resolution
1mA

Circuit Libraries for real world: Virtual Analog-Digital Component like Switches, Display Devices, Computational Circuits, Operational Amplifier, Motor Control and Relay Circuits.

Event scheduler: for design & testing of circuits: Time setting and loop function

General Information

Dimensions (mm)
W281 x H80 x D285
Power Supply
100-240VAC, 50 / 60Hz, <35VA
Weight
2.25 kg Approximately
Operating Conditions
0-40 C, 85% RH
Resource Material
CD (Operating procedure, Front panel control,DesignLab Software)
System Requirement
Windows XP- SP3 and above, Windows7,8 & 10
Supported Architecture
X86